Use two single controls to control both gimbal and aircraft. Map the gimbal and aircraft control channels to
a single remote controls through DJI LIGHTBRIDGE Assistant.
Air system connection：
1. Connect Gimbal Port on air system to G7 port on DJI HD gimbal with supplied Gimbal cable (DJI HD
gimbal).
2. Connect DBUS port on air system to DBUS port (X2 port) on flight control system with DBUS cable.
3. Refer to gimbal and flight control system manuals to complete connection.
Ground system connection：
4. Connect remote control to the ground station via training port.
5. Connect mobile devices or HDMI monitor to the master and slave ground station.
6. Ground station displays DJI HD gimbal video signal.
To Next Page
Loading...
Need help?
General
