dji OSMO ACTION 4 User Manual

DJI Osmo Action 4 User Manual
6
©
2023 DJI All Rights Reserved.
Accessories
Osmo Action 4 is compatible with various accessories to exibly change the position to shoot
various sports scenes.
Osmo Action Curved Adhesive Base Kit
The Osmo Action Curved Adhesive Base Kit includes the following accessories.
Accessory Description
Osmo Action Quick-Release Adapter Mount: with a magnetic
design, the quick-release adapter mount can be easily attached
to the camera and connected to other accessories.
Osmo Locking Screw: secures the Osmo Action Quick-Release
Adapter Mount to the Osmo Action Curved Adhesive Base.
Osmo Action Curved Adhesive Base: the base forms a strong,
durable, and long-lasting bond on clean and curved surfaces,
ensuring secure mounting.
Press down on the camera until the clips of the quick-release adapter mount are rmly inserted
into the quick-release slots on the camera, and then tighten the locking screws. Wipe the
surface of the object before attaching the adhesive base. Attach and press the adhesive base
down rmly, and hold for at least 10 seconds. It is recommended to wait 30 minutes before
attaching the camera.
90°90°

dji OSMO ACTION 4 Specifications

General

Maximum video resolution	3648 x 2736 pixels
Weatherproof	Yes
Product color	Black
Waterproof up to	18 m
Sensor type	CMOS
Field of view (FOV) angle	155 °
Battery voltage	3.85 V
Battery capacity	1770 mAh
Operating temperature (T-T)	-20 - 45 °C
Storage media	Memory card
Compatible memory cards	MicroSD (TransFlash)
Maximum memory card size	512 GB

Weight and Dimensions

Depth	70.5 mm
Width	44.2 mm
Height	32.8 mm
Weight	145 g