To Next Page

To Previous Page

Refrigerator

5.4 Installing the vent application

FIRE OR EXPLOSION HAZARD. Make sure vent allows raw (unburned) LP Gas to escape to the

outside. LP Gas is heavier than air, and will collect at ﬂoor level if not vented correctly. Failure to obey this warning

could result in death or serious injury.

Read before proceeding:

• Use the inboard installation option when the radius of the roof, or the presence of building materials,

interferes with the placement of the roof vent.

• All fasteners are to be provided by the installer.

• Select the appropriate screw types for the application for which they are being used.

• Minimize screw lengths to ﬁt applications appropriately, unless otherwise noted.

• Rivets are acceptable only where noted.

➤ Apply sealant around the thread or rivet body of all fasteners.

➤ Apply dry sealant around the surface mounting face of all vent frames or vent bases before installation.

➤ Apply wet sealant around the perimeter of all vent frames or vent bases aer installation. Do not allow the

sealant to block the molded weep tracks in the vent frame.

Roof vent application

Recess Depth

Box Baﬄe

Recess Depth

Side

View

Side

View

Roof Vent

Dometic RM2354 Installation Manual

Other manuals for Dometic RM2354