Using the toilet SaneoB, SaneoC
22
6.5 Draining the cassette tank
Empty the cassette tank when the indicator lights up:
➤ Remove the cassette tank (chapter “Removing the cassette tank” on page 20).
➤ Press the release button in the middle of the handle and pull the handle out to its
end position (fig. 0, page 5).
A
➤ Bring the tank to the nearest designated disposal location.
➤ Press the release button in the middle of the handle and push the handle back
into the cassette.
➤ Set the cassette tank upright and rotate the drain pipe 90° upward (fig. 4,
page 3).
I
➤ Twist off the cap (fig. 5, page 3).
➤ Put the cap onto the cassette (fig. 5, page 3).
➤ Hold the cassette tank by the handle with one hand (fig. a 1, page 5) and with
the other hand on the housing (fig. a 3, page 5), so that you can push the vent
button (fig. a 2, page 5) while it is draining.
➤ Press the vent button when the drain pipe points downwards.
✓ The tank drains steadily and without splashing.
➤ After draining, rinse out the cassette tank carefully.
➤ Add a sanitary additive to the cassette (chapter “Adding sanitary additive” on
page 20).
➤ Clear away course dirt from the wheels of the cassette tank to prevent scratching
of the cassette housing.
NOTICE!
•
Do not shake the cassette tank vigorously.
•
Do not hang the cassette tank on a bicycle or other vehicle for trans-
portation.
•
Do not place heavy objects on the cassette tank during transport.
This can damage the housing and rollers.
NOTE
Avoid turning the drain pipe more than 90°, as it otherwise can come
off.
Saneo-B-Saneo-C--O-5s.book Seite 22 Mittwoch, 7. März 2018 9:45 09
To Next Page
Loading...
Need help?
General