Cleaning and maintenance SaneoB, SaneoC
24
7 Cleaning and maintenance
!
A
I
➤ Clean the toilet regularly inside and out with a soft cloth and lukewarm water with
a mild cleaning agent.
➤ Then wash the surfaces with clear water.
➤ Clean and grease all seals on the toilet and cassette tank regularly. In case of
frequent use, perform these actions monthly or after 3 – 5 drainings of the
cassette. Use grease or silicone-based spray.
The manufacturer recommends:
•
Grease: OKS
®
1110
•
Silicone spray: OKS
®
1111
7.1 Cleaning the flushing nozzle
➤ Pull the cover away from the flushing nozzle (fig. c, page 6).
➤ Remove any dirt or debris with a cloth or soft brush.
➤ Put the cap onto the flushing nozzle (fig. d, page 6).
7.2 Greasing the slider
!
The slide moves smoothly when it is regularly lubricated.
CAUTION!
Cleaning agents for the toilet may not contain chlorine or alcohol!
NOTICE!
•
To prevent material changes, do not use hard, abrasive or soda-
based cleaning agents (scouring agents).
•
Do not use polish for cleaning.
NOTE
For regular cleaning of the toilet bowl, use a mild colourless cleaning
agent.
CAUTION!
When the slider is closed during cleaning or greasing, there is a risk of
crushing body parts (fig. e, page 6).
Saneo-B-Saneo-C--O-5s.book Seite 24 Mittwoch, 7. März 2018 9:45 09
To Next Page
Loading...
Need help?
General