1
1 General Information
1.1 Introduction
The Dow-Key Microwave MS, MP, CB Switch Matrix series are
electromechanical RF matrices. They come equipped with a GPIB (IEEE 488)
port which allows the user to easily access the matrix remotely. Other
interfaces included are an RS-232 port, an USB (used as virtual serial port) and
a CAN Bus port. Any model 2 RU or higher also comes equipped with a touch
screen LCD front panel display for manual (Local) operation. These models are
not intended to be used to power or control anything other than Dow-Key
supplied switches. Connection of other CAN Bus products or other devices not
described herein will void quality certifications and the warranty.
This user manual covers all three matrix series since most features are the
same among the various models. The user shall focus on the matrix series of
interest and skip any section that does not pertain to his matrix.
Information specific to your model (like technical specifications and RF
configuration) can be found in appendices at the end of this manual.