DSC neo HS2016 User Manual

Chapter 8
8.4 Setting the Auto Arm Time
The system can be configured to Auto arm at a specific time on each day of the week. If a specific time is
not configured for a day of the week the system will not arm automatically on that day.
NOTE: Access to this feature must be configured by installer.
To set the Auto Arm Time:
LCD Display
1. From the User Function menu use the shortcut key [0][3] or press [<]
[>] to scroll to Auto Arm Time.
Press (*) for <>
Auto Arm Time
2. Press [*]to open a days of the week sub menu. Scroll the days of the
week and press [*] to set the time for that day.
OR
If using an ICN or LED keypad to select the desired day press [1-7]
where 1= Sunday and 7=Saturday.
Press (*) for <>
Sunday
3. Using a 24 hour format, set the desired time. After you enter the
fourth digit the screen will revert back to the previous day of the
week menu. Entering the time 9999 disables the late to open fea-
ture for that day. When using an ICN or LED keypad the time will not
display.
Set 24Hr Time
Enter HH:MM 9999
4. Continue setting the time for the desired days of the week. When fin-
ished press [#] to return to the Ready state.
Set 24Hr Time
Enter HH:MM 9999
NOTE: If you set an invalid time the error tone will sound.
8.5 Allowing the Installer to Service your System Remotely - DLS
Occasionally, your installer may need to remotely access the Installer programming of your security sys-
tem using Downloading Software (DLS). In order for this to successfully occur, you may need to manually
allow access to your system.
NOTE: Access to this feature must be configured by installer.
To enable/disable the System Service/DLS LCD Display
1. From the User Function menu use the shortcut key [05] or press to
scroll to SystemServ/DLS.
Press (*) for <>
SystemServ/DLS
2. Press [*] to enable/disable the SystemServ/DLS feature.
SystemServ/DLS
is Enabled
or
3. When finished press [#] to return to the Ready state.
SystemServ/DLS
is Disabled
8.6 User Callup
Using DLS, User Call-up allows your system to make one attempt to connect to the installer’s remote com-
puter. For a successful connection, the remote computer must be waiting for the system’s call.
NOTE: Access to this feature must be configured by installer.
To perform a User Callup:
LCD Display
1. From the User Function menu use the shortcut key [0][6] or press [<]
[>] to scroll to User Callup.
Press (*) for <>
User Callup
2. When finished press [*] to return to the Ready state.
8.7 Late to Open
Typically used to track children after school, the Late to Open feature allows you to be notified if your
alarm system is not disarmed by a programmed time of day.
For example, if you arrive from work at 5pm, and your child arrives home at 4 p.m. you could set the pro-
grammable time for 4:15 p.m. If the system is not disarmed by 4:15 an alert would be sent to the mon-
itoring station and an event will be stored in the event buffer viewable from an LCD keypad. If SMS
notifications are configured for your system the monitoring station will notify you via SMS message. For
more information see: "Event Buffer".
NOTE: Access to this feature must be configured by installer.
- 29 -

DSC neo HS2016 Specifications

General

Brand	DSC
Model	neo HS2016
Category	Security System
Language	English