DSC neo HS2016 User Manual

Chapter 8
To enable/disable Late to Open:
LCD Display
1. From the User Function menu use the shortcut key [0][9] or press the
scroll keys to select Late to Open.
Press (*) for <>
Late to Open
2. Press [*] to enable/disable the Late to Open feature.
Late to Open
is Enabled
or
3. When finished press [*] to return to the Ready state.
Late to Open
is Disabled
To set the Late to Open time:
LCD Display
1. From the User Function menu use the shortcut key [1][0] or press
the scroll keys to select Late to Opn Time.
Press (*) for <>
Late to Opn Time
2. Press [*] to open a days of the week sub menu. Scroll the days of
the week and press [*] to set the time for that day.
OR
If using an ICN or LED keypad to select the desired day press [1-7]
where 1= Sunday and 7=Saturday.
Press (*) for <>
Sunday
3. Using a 24-hour format, set the desired time. After you enter the
fourth digit the screen will revert back to the previous day of the
week menu. Entering the time 9999 disables the late to open fea-
ture for that day. When using an ICN or LED keypad the time will not
display.
Set 24Hr Time
Enter HH:MM 9999
4. Continue setting the time for the desired days of the week. When fin-
ished press [#] to return to the Ready state.
NOTE: If you enter an invalid time the error tone will sound.
8.8 Changing the Brightness of the LCD keypad
To change the LCD brightness:
LCD Display
1. From the User Function menu use the shortcut keys [1][2] or using
the scroll keys select Bright Control and press [*].
Press (*) for <>
Bright Control
2. Enter the 2 digit value or scroll to the desired brightness level and
press [*] to return to the previous menu.
Brightness <>
Level... XX
3. Press [#] to return to the Ready state.
8.9 Changing the Contrast of the LCD keypad
To change the LCD contrast:
LCD Display
1. From the User Function menu use the shortcut keys [1][3] or use the
scroll keys to select Contrast Control and press [*].
Press (*) for <>
Contrast Control
2. Enter the 2 digit value or scroll to the desired contrast level and
press [#] to return to the previous menu.
Contrast <>
Level... XX
3. Press [#] to return to the Ready state.
8.10 Setting the Buzzer Volume
To change Buzzer volume:
LCD Display
1. From the User Function menu use the shortcut key [1][4] or press the
scroll keys to select Buzzer Control and press [*].
Press (*) for <>
Buzzer Control
2. Enter the 2 digit value or scroll to the desired volume level and press
[#] to return to the previous menu.
Buzzer <>
Level... XX
3. Press [#] to return to the Ready state.
- 30 -

DSC neo HS2016 Specifications

General

Brand	DSC
Model	neo HS2016
Category	Security System
Language	English