Duplo DB-200 User Manual

~38~
4
Place the cover sheet onto the nipping station when the display
flashing "LOAD COVER". The clamp station will automatically
move back to the position above the nipping station and start the
binding process for the book block and cover sheet.
Note:
If you accidentally remove or drop the cover sheet during the
clamping station return to the nipping station, the control panel
will show “COVER?”. At this moment, you have to place the
cover on the nipping station and press "START" button to
recover the process.
Having completed one bound book, the clamp will
automatically open and display "UNLOAD" so that you can
remove the finished book from the right end. Meanwhile, the
LED display of control panel will count once for the total
binding amount as shown. The DB-280 will flash "LOAD
BOOK" display.

5
Place the same thickness of book block onto the clamp as the
label instructions on the clamp. The clamp station will
automatically clamp down the book block and move to the left.
Repeat step 5 to 4 for more books in “AUTO” operation.

Duplo DB-200 Specifications

General

Brand	Duplo
Model	DB-200
Category	Binding Machine
Language	English