15 Transporting the unit
WARNING
Infection due to contaminated unit
❯
Disinfect the unit before transport.
❯
Close all media connections.
Wear protective equipment to avoid any
risk of infection (e.g. liquid-tight protective
gloves, protective goggles, face mask).
❯
Before disassembly, clean and disinfect the
suction unit and the unit using a suitable disin-
fectant approved by Dürr Dental.
❯
Disinfect a defective unit using a suitable sur-
face disinfection agent.
❯
Seal all connections with sealing caps.
❯
Pack the unit securely in preparation for trans-
port.
Fig. 3: V 300 S
1 Dummy bushing
2 Securing ring
Fig. 4: VS 300 S
1 Auxiliary air connection sealing cap
2 Suction connection sealing caps
3 Rinse connection sealing cap
4 Water outflow sealing cap
Troubleshooting
7119100007L02 1909V001 37
EN