Dyson Airblade User Manual

Dyson Airblade
TM
hand dryer
10
Make sure that power is switched
on to the unit.
Place hands into the Airblade
TM
hand dryer and unit and airflow
will begin automatically.
Withdraw hands slowly upwards
through the air a couple times
to thoroughly dry hands in
12 seconds.
Remove hands and the unit
will shut off.
Please register your product
information with us.
•Youmaysendinthe
completed registration card in
the provided pre-paid envelope.
•CallourDysonHelplinetoll
freeat1-888-DYSON-AB
•Visitusonthewebat
www.dysonairblade.com
Surfaces
Make sure that all surfaces of
the Airblade
TM
hand dryer are
cleaned daily with a soft cloth
and non-abrasive, non-caustic
cleaning solution.
Air Inlet
Regularly check at the base of the
Airblade
TM
hand dryer to ensure
that it is free from dust and debris.
If the air inlet gets dirty simply
remove dust or debris with a dry
cloth or vacuum
Fig 12
.
Make sure that all of the Airblade
TM
hand dryer's surfaces and the
(4) sensor lenses are wiped down
daily to maintain uninterupted
operation of the unit
Fig 13
.
Cleaning AdviceTesting
Cleaning and
Maintenance Advice
Maintenance Advice
Final Inspection
Fig 12 Fig 13
ENG

Dyson Airblade Specifications

General

Type	Hand dryer
HEPA Filter	Yes
Power Consumption	1600 W
Voltage	220-240 V
Material	ABS plastic
Activation	Automatic
Frequency	50/60 Hz
Motor Type	Digital motor
Color	White