READ BEFORE PROCEEDING FURTHER
CAUTION: Risk of electric shock! Do not remove casing or attempt repair unless unit is being
serviced by qualified service personnel. If casing is removed or handled improperly the internal
components of the Dyson Airblade
TM
hand dryer may cause harm or become permanently damaged.
WARNING: To reduce the risk of fire or electric shock, do not expose the internal mechanism/
components of this unit to rain or moisture.
General notes:
The instructions contained within the Owner’s Manual must be read carefully before attempting to install the
Airblade
TM
hand dryer. Read and retain for future reference.
Failure to accurately follow the instructions may result in the incorrect operation of the Airblade
TM
hand dryer,
damage to property and/or personal injury.
Dyson will not be held liable for any damage to property or personal injury as a result of failure to comply with
the instructions contained herein.
Do not use Airblade
TM
hand dryer for anything other than drying hands.
The Airblade
TM
hand dryer must be grounded properly.
Trouble free operation and safety can only be continued by using genuine Dyson spare parts.
WARNING:
This product may contain substances known to the state of California to cause cancer, birth defects and other
reproductive harm. Wash hands after handling.
3
Important Safety
Information
Contents
4 Glossary of Terms
Contents of Box
•Toolsneeded
5 Installation Procedures
•Electricalrequirements
6 •Positioning
•MountingBracket
7 •RemovingtheFasciaCover
8 •ConnectingtoElectricalSupply
9 •RefittingFrontFascia&AccessPanel
10 Final Inspection
Cleaning and Maintenance Advice
11 Troubleshooting
12-14 Limited Warranty Information
15 Contacting Dyson
READ AND SAVE THESE INSTRUCTIONS
Dyson Airblade
TM
hand dryer
ENG
To Next Page
Loading...
Need help?
General
