Requesting a Declaration of Conformity
Units that are labeled with a CE mark comply with the following harmonized standards and EU directives:
l
Harmonized Standards: EN 62040-1-1 and EN 62040-2; IEC 60950-1
l
EU Directives:
73/23/EEC, Council Directive on equipment designed for use within certain voltage limits
93/68/EEC, Amending Directive 73/23/EEC
2004/108/EEC, Council Directive relating to electromagnetic compatibility
The EC Declaration of Conformity is available upon request for products with a CE mark. For copies of the EC
Declaration of Conformity, contact:
Eaton Power Quality Oy
Koskelontie 13
FIN-02920 Espoo
Finland
Phone: +358-9-452 661
Fax: +358-9-452 665 68
Eaton, FERRUPS, and Intelligent Power Protector are registered trademarks of Eaton Corporation or its
subsidiaries and affiliates. IBM and AS/400 is a registered trademark International Business Machines
Corporation. Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States
and other countries. National Electrical Code and NEC are registered trademarks of National Fire Protection
Association, Inc. Phillips and Pozidriv are registered trademarks of Phillips Screw Company. All other
trademarks are property of their respective companies.
Copyright 2009–2011 Eaton Corporation, Raleigh, NC, USA. All rights reserved. No part of this document may
be reproduced in any way without the express written approval of Eaton Corporation.
To Next Page
Loading...
Need help?
General
