Eaton 9135 5000/6000 VA UPS User’s Guide 164201726—Rev 4 www.eaton.com/powerquality 14
Chapter 3 Installation
This section explains:
l
Equipment inspection
l
UPS internal battery connection
l
UPS setup and installation, including Extended Battery Modules (EBMs)
l
Remote power-off (RPO) installation
l
UPS rear panels
Inspecting the Equipment
If any equipment has been damaged during shipment, keep the shipping cartons and packing materials for the
carrier or place of purchase and file a claim for shipping damage. If you discover damage after acceptance, file
a claim for concealed damage.
To file a claim for shipping damage or concealed damage: 1) File with the carrier within 15 days of receipt of
the equipment; 2) Send a copy of the damage claim within 15 days to your service representative.
Checking the Accessory Kit
Verify that the following additional items are included with the UPS:
NOTE Check the battery recharge date on the shipping carton label. If the date has expired
and the batteries were never recharged, do not use the UPS. Contact your service
representative.
NOTE Packaging must be destroyed according to waste management standards.
Recycling icons are displayed for easy selection.
Table 1. UPS Accessory Kit
Item Description
UPS user's guide or CD
Screwdriver
RS-232 serial cable
To Next Page
Loading...
Need help?
General
