Eaton 9395 UPS User Manual

Eaton 9395 UPS (450–825 kVA) Installation and Operation Manual S 164201725 Rev 4 www.eaton.com/powerquality
6-1
Chapter 6 Understanding UPS Operation
6.1 UPS System Overview
The Eaton 9395 UPS is a continuous-duty, solid‐state, transformerless (at 480 Vac),
three-phase, true online system that provides conditioned and uninterruptible AC
power to the UPS system's output and critical load.
The basic system consists of a rectifier, battery converter, inverter,
monitoring/operation control panel, integrated communication server, and digital
signal processor (DSP) logic. Figure 6‐1 shows the main elements of the UPS system.
If utility power is interrupted or falls outside the parameters specified in Chapter 10,
“Product Specifications,” the UPS uses a backup battery supply to maintain power to
the critical load for a specified period of time or until the utility power returns. For
extended power outages, the UPS allows you to either transfer to an alternative
power system (such as a generator) or shut down your critical load in an orderly
manner.
Output
Contactor
K3
Battery
Battery
Breaker
Battery
Converter
Input
Contactor
K1
AC Input to
Rectifier/
Charger
AC Input to
Bypass
Backfeed
Protection
Contactor
K5
Power Module
InverterRectifier
Digital
Metering
Static
Switch
AC Output
to Critical
Load
UPS Cabinet
Battery
Contactor
K2
Battery System
Input
Breaker
CB1
(optional)
Bypass Breaker (CB4)
NOTE On a UPS configured as an Input Output Module (IOM), the bypass input, static switch, bypass breaker (CB4), and
backfeed protection contactor (K5) are not present.
NOTE On a UPS configured with a Continuous Static Switch (CSS), bypass breaker (CB4) is not present.
Figure 6‐1. Main Elements of the UPS System
Figure

Eaton 9395 UPS Specifications

General

Brand	Eaton
Model	9395 UPS
Category	UPS
Language	English