Eaton 9395 UPS User Manual

UPS OPERATING INSTRUCTIONS
Eaton 9395 UPS (450–825 kVA) Installation and Operation Manual S 164201725 Rev 4 www.eaton.com/powerquality
7-26
3. On the UPS Control Command screen, select the UPM to shut down.
4. Press the
CONTROLS pushbutton on the UPS Control Command menu bar. The
UPM Control Command screen is displayed.
5. On the UPM Control Command screen, select UPM OFF.
6. Press the
SELECT pushbutton on the UPM Command menu bar.
The UPM status indicates READY
. The input, output, and battery contactors
open, and the power module remains on. The remaining UPMs supply the
critical load.
7. To turn off the power module, press the CONTROLS pushbutton on the UPS
Control Command menu bar. The UPM Control Command screen is displayed.
8. On the UPM Control Command screen, select UPM OFF.
9. Press the
SELECT pushbutton on the UPM Command menu bar.
The UPM status indicates SHUTDOWN. The power module is turned off. The
remaining UPMs continue to supply the critical load.
Logic power remains on.
7.3.21 Single UPM Restart
To restart a single UPM from a shutdown state:
1. Press the
CONTROLS pushbutton on the main menu bar. The System Status
screen is displayed.
2. On the System Status screen, select the UPM command. The UPS Control
Command screen screen is displayed.
3. On the UPS Control Command screen, select the UPM to restart.
4. Press the
CONTROLS pushbutton on the UPS Control Command menu bar. The
UPM Control Command screen is displayed.
5. On the UPM Control Command screen, select UPM ON.
6. Press the
SELECT pushbutton on the UPM Command menu bar.
7. Verify the following messages display sequentially on the UPM status line:
DC STARTING, CHARGER OFF
INVERTER STARTING
INVERTER SYNCING
READY
The UPM rectifier and inverter turn on.
8. To transfer the UPM to Online mode, press the
CONTROLS pushbutton on the UPS
Control Command menu bar. The UPM Control Command screen is displayed.
9. On the UPM Control Command screen, select
UPM GO TO ONLINE.
10. Press the
SELECT pushbutton on the UPM Command menu bar.
The UPM transfers to Online mode. The UPM status indicates ONLINE.

Eaton 9395 UPS Specifications

General

Brand	Eaton
Model	9395 UPS
Category	UPS
Language	English