Eaton 9PX6K-L User Manual

Eaton 9PX Lithium-Ion User Guide DPD-9PX2206—Rev 01 13
Figure 6. 9PXEBM192RT-L
Battery
power
cable,
attached
with
battery
detection
cable
Stabili
z
er
brac
k
et
(4
screws
included)
R
ack
kit
for
1
9-inch
enclosures
EBM
Installation
manual (Quickstart)
1
2
3
4
1
2
3
4
9PX EBM Li-ion
NOTE 1 Discard the EBM user’s guide if you are installing the EBM with a new UPS at the same
time.
NOTE 2 Use the UPS user’s guide to install both the UPS and the EBM.
NOTE 3 If you ordered other UPS accessories, refer to specific user manuals to check the
packing contents.
33..44 TToowweerr IInnssttaallllaattiioonn
Tip If you ordered other UPS accessories, refer to specific user manuals to check the tower installation with
the UPS.
To install the cabinet:
1. Place the UPS on a flat, stable surface in its final location.
2. Always keep 6" or 150 mm of free space behind the UPS rear panel for ventilation.
3. If installing additional cabinets, place them next to the UPS in their final location.
Tower Installation

Eaton 9PX6K-L Specifications

General

Brand	Eaton
Model	9PX6K-L
Category	UPS
Language	English