Eaton ELC Series User Manual

- 5 -
restart its operation (RUN).
 Electrical Specifications
Model
Item
ELC-PV28NNDR ELC2-PV28NNDR ELC-PV28NNDT
ELC2-PV28NNDT
ELC2-PV28NNDP
Power supply
voltage
24 Vdc (-15% ~ 20%) (with reverse polarity protection on the DC input power)
Inrush current Max. 2.2A@24 Vdc
Fuse capacity 2.5A/30 Vdc, Polyswitch
Power
consumption
6W
Insulation
resistance
> 5M (all I/O point-to-ground: 500 Vdc)
Noise
immunity
ESD (IEC 61131-2, IEC 61000-4-2): 8kV Air Discharge
EFT (IEC 61131-2, IEC 61000-4-4): Power Line: 2kV, Digital I/O: 1kV, Analog
& Communication I/O: 1kV
Damped-Oscillatory Wave: Power Line: 1kV, Digital I/O: 1kV
RS (IEC 61131-2, IEC 61000-4-3): 26MHz ~ 1GHz, 10V/m
Grounding
The diameter of grounding wire shall not be less than that of the wiring
terminal of the power. (When ELCs are in use at the same time, please make
sure every ELC is properly grounded.)
Operation /
storage
Operation: 0ºC ~ 55ºC (temperature); 5 ~ 95% (humidity);
pollution degree 2
Storage: -25ºC ~ 70ºC (temperature); 5 ~ 95% (humidity)
Agency
approvals
UL508
European community EMC Directive 89/336/EEC and Low Voltage Directive
73/23/EEC
Vibration /
shock
immunity
International standards: IEC61131-2, IEC 68-2-6 (TEST Fc)/IEC61131-2 &
IEC 68-2-27 (TEST Ea)
Weight (g) 260 260 240
240(T)
230(P)
Input Point
24 Vdc single common port input Spec.
Items
200kHz 20kHz 10kHz
Input No. X0, X1, X4, X5 X10, X11, X14, X15
X2, X3, X6, X7, X12,
X13, X16, X17
Input voltage
(±10%)
24 Vdc, 5mA
Input impedance 4.7k 3.3k 4.7k
OffOn > 4mA (16.5V) > 6mA (18.5V) > 4mA (16.5V)
Action level
OnOff < 1.5mA (8V) < 2.2mA (8V) < 1.5mA (8V)
OffOn < 150ns < 3.5s < 8s
Response time
OnOff < 3s < 20s < 60s
Filter time Adjustable within 10 ~ 60ms by D1020, D1021 (Default: 10ms)
Output Point
Transistor (NPN, PNP)
Spec.
Items
Relay
High-speed Low-speed
Output No. Y0 ~ Y7, Y10 ~ Y13 Y0 ~ Y4, Y6 Y5, Y7, Y10 ~ Y13
Max. frequency 1Hz 200kHz 10kHz
Working voltage 250 ac, < 30 Vdc 30 Vdc
Max. load Resistive
1.5A/1 point
(5A/COM)
0.3A/1 point @ 40°C
Inductive
＃
1
9W (30 Vdc)
Max. load
Lamp 20WDC/100WAC 1.5W (30 Vdc)
OffOn 0.2s 20s Response
time
OnOff
Approx. 10ms
0.2s 30s

Eaton ELC Series Specifications

General

Brand	Eaton
Model	ELC Series
Category	Controller
Language	English