Eaton Network Management Card User Manual

Network Management Card
– User Manual 34003991XT_EN/EF Page 109/127
7.4 Choice 4: Return to Default Configuration
Enables restoration of the default configuration of all the card’s parameters
-----------------------------------------------------------------------------
EATON
NETWORK MANAGEMENT CARD
-----------------------------------------------------------------------------
1 : Reset
2 : Network configuration
3 : Set Login Password to Default
4 : Return to Default Configuration
0 : Exit
-----------------------------------------------------------------------------
Wait during configuration returns to default ...
Wait for the confirmation message.
Configuration has been set to default one.
You must Reset the card.
The card must be restarted in order for the new parameters to be taken into account.

Eaton Network Management Card Specifications

General

Model	Network Management Card
Operating Temperature	0°C to 40°C (32°F to 104°F)
Network Protocols	TCP/IP, HTTP, HTTPS, SNMP, SMTP, Telnet, SSH
Management Interface	Web-based, CLI
Security	SSH
Firmware Upgrade	Remote firmware upgrade
Event Logging	Yes
Environmental Monitoring	Optional environmental sensor support
Communication Interface	Ethernet (10/100Base-T)
Remote Monitoring	Yes
Remote Control	Yes
Alerting	Email, SNMP traps
Management Features	Automated shutdown
Power Requirements	Powered by connected UPS
Humidity	95% non-condensing