Network Management Card
– User Manual 34003991XT_EN/EF Page 53/127
4.4.2 System
Click on System in the menu.
This menu enables the customisation of the information on the UPS properties
pages.
UPS Contact: This text field is limited to 49 characters. Enter the name of the person responsible for UPS
administration at IT network level and/or electrical maintenance. This field does not appear on any other Web
page. By default, its value is "Computer Room Manager".
UPS Location: Enter a description (limited to 31 characters) of the location of the UPS in your installation (e.g.
Computer room E1-C066). This text is displayed in the home page. By default, its value is "Computer Room".
Default Language: Enables initialisation of the browser language at card connection.
Choice of one of the available languages: English, French, German, Spanish, Italian, Chinese Traditional,
Chinese simplified, Japanese, Portuguese, Russian, Korean changes the language of the html interface pages
(Refresh the web page <F5> after modification).
History log interval: [from 5 to 99999 sec., 60 by default]. Measurement save period.
Environment log interval: [from 60 to 99999 sec., 300 by default]. Temperature and humidity measurement save
period.
Reset Communication button: performs a remote reboot of the card without modifying the configuration. This
action is compulsory for consideration of any changes made on the "Network Settings" page.
Factory Reset button: enables restoration of the default configuration of all the card’s parameters. TCP/IP
parameters: IP address, subnet mask, gateway and BootP/DHCP value are maintained if the "Keep TCP/IP
parameters" option is selected.
To Next Page
Loading...
Need help?
General
