Network Management Card
– User Manual 34003991XT_EN/EF Page 82/127
For simplicity, the settings are sorted in the same way as the Web interface.
According to the current configuration, some settings may be read-write, read-only, write-only or hidden.
In each screen, it is possible to close the session with the command “quit”.
The code colour is the following:
• Settings in read-write or write-only mode: light green.
• Settings in read-only mode: yellow.
• Warning message: green.
• Error message: light red.
6.3.1 Tree description
Main menu Reset menu
Network menu MAC address
../..
SMTP menu Host name
../..
SNMP menu Version
../..
Trap receivers Receiver 1 Host name
../..
Receiver 2 Host name
../..
Receiver 3 Host name
../..
System menu UPS contact
../..
Shutdown menu Master Name
../..
Outlet 2 Name
../..
Outlet 3 Name
../..
Access Control menu Login
../…
Date & Time menu Date
../..
Environment menu Sensor Name
Temperature Unity
../..
Humidity High Threshold
../..
Input#1 Identifier
To Next Page
Loading...
Need help?
General
