Eizo FlexScan EV2480 User Manual

3-2. Setting Menu Functions
●
Color Adjustment
The color mode settings can be adjusted according to personal preference.
Functions that can be adjusted di󰀨er depending on the color mode.
√: Adjustable -: Not adjustable
Function
Color Mode
User1
User2
sRGB Paper Movie DICOM
Brightness
√ √ √ √
-
Contrast
√
- -
√
-
Temperature
√
-
√ √
-
Gamma
√
- - - -
Advanced
Settings
Overdrive
√
- - - -
Hue
√
- -
√
-
Saturation
√
- -
√
-
Gain
√
- - - -
Reset
√ √ √ √
-
Attention
• It takes about 30 minutes for the monitor display to stabilize. Please wait 30 minutes or more after power to
the monitor has been turned on before adjusting the monitor.
• The same image may be observed in di󰀨erent colors on multiple monitors due to monitor-specic
characteristics. Make ne color adjustments visually when matching colors across multiple monitors. Follow
the procedure below to adjust and match colors across multiple monitors.
1. Display a white screen on each monitor.
2. Use one of the monitors as a visual reference point to make adjustments to the “Brightness”,
“Temperature”, and “Gain” of the other monitors.
• When Auto EcoView is set to “On”, the same brightness setting is shared by all of the color modes and cannot
be set individually for each color mode.
18
Chapter 3 Advanced Adjustment / Setting

Eizo FlexScan EV2480 Specifications

General

Energy efficiency scale	A to G