●
Preference Settings
The monitor’s settings can be congured to suit the usage environment or personal preference.
Function
Setting
Value
Description
Menu Rotation 0°
90°
270°
When the monitor is used in a vertical position, the direction of the Setting
menu can also be changed.
Note
• Check whether the cables are connected properly.
• It is necessary to congure the settings of the computer to use the
monitor vertically. For details, refer to our website (www.eizoglobal.com).
• The menu cannot be rotated 180°. When rotating a monitor 180°, perform
the adjustments / settings for the monitor before rotating it.
Power Save On
O
The monitor can be set to enter power saving mode according to the state of
the PC.
The monitor changes to power saving mode about 15 seconds after signal
input ceases to be detected.
When the monitor has shifted to power saving mode, images are not
displayed on the screen and audio is not output.
• How to exit power saving mode
- Press the operation switches (excluding
) on the front of the monitor
- The monitor automatically exits power saving mode when the monitor
receives input
Note
• At the time of shifting to power saving mode, a message that indicates
the transition is displayed 5 seconds in advance.
• When not using the monitor, you can turn o the main power supply or
disconnect the power plug so that the power is cut completely.
• When “Compatibility Mode” (page 26) is set to “On”, even if the monitor
shifts to power saving mode, devices connected to the USB downstream
port are operational. Therefore, power consumption of the monitor varies
with connected devices even in power saving mode.
Power Indicator On
O
The power indicator (white) can be turned o in normal operation mode.
Monitor Reset - Restore all settings to their default values except for the following settings.
• Settings on the “Administrator Settings” menu
23
Chapter 3 Advanced Adjustment / Setting
To Next Page
Loading...
Need help?
General
