Eizo FlexScan S1934 User Manual

11
Chapter 2 Basic Adjustment/Setting
Function Description
Auto EcoView The ambient light sensor on the front of the monitor detects the
ambient brightness to automatically adjust the screen brightness
to a comfortable level using the Auto EcoView function. The
power consumption of the backlight can be curtailed by adjusting
the brightness to an appropriate level.
This function can also mitigate eye strain and tiredness caused
by a screen that is too bright or too dark.
Use the “Advanced Settings” to set the automatic adjustment
range to suit the monitor’s usage environment or personal
preference.
Setting Range: On, Off
Note
• Be careful not to block the ambient light sensor on the lower
side of the monitor when using the Auto EcoView function.
• Even when the Auto EcoView setting is “On”, the
operation switch on the front of the monitor or color
adjustment can be used to change the “Brightness” to suit
your personal preference. Moreover, the manner in which
the Auto EcoView function changes brightness also differs
according to the changed value.
• When “DICOM” is selected for the color mode, the Auto
EcoView setting is turned “Off”.
Advanced
Settings
Maximum
Minimum
Brightness
Set the range for automatic brightness adjustment.
By setting the maximum value and minimum value of the
adjustment range in advance, the brightness will be adjusted
automatically within the set range.
Setting Range: 0 to 100
Note
• The maximum and minimum brightness values cannot be
set to the same value.
Ambient Light
Using the default setting is recommended.
(Default setting: “Bright” for maximum value, “Dark” for minimum
value)
Setting Range: Bright, Standard, Dark
Note
• For details on the “Ambient Light” setting, refer to our web
site (http://www.eizoglobal.com).
Reset Return the advanced settings to their default values.

Eizo FlexScan S1934 Specifications

General

Brand	Eizo
Model	FlexScan S1934
Category	Monitor
Language	English