7
Chapter 1 Introduction
●
Rear
Height adjustable StandTilt Stand
12
5
11
12
6
11
98
7
7
5
10
6
6
6
5. Security lock slot Complies with Kensington’s MicroSaver security system.
6. Speakers Outputs audio.
7. Stand
*2
Tilt Stand: Used to adjust the angle (tilt) of the monitor screen.
Height adjustable Stand: Adjusts the height and angle (tilt and swivel) of the
monitor.
8. Power connector Connects the power cord.
9. Input signal connectors The following connectors are available on the monitor rear in order of left to
right.
DisplayPort connector
DVI-D connector
D-Sub mini 15-pin connector
10. Stereo mini jack Connects to a stereo mini jack cable.
11. Headphone jack Connects to headphones.
12. Cable holder Holds the monitor cables.
*2 An optional arm (or optional stand) can be attached by removing the stand section (see “6-1. Attaching the
Optional Arm” (page 27)).
1-2. Supported Resolutions
The monitor supports the following resolutions.
Resolution Vertical Scan Frequency
640 × 480 60 Hz
720 × 480 60 Hz
800 × 600 60 Hz
1024 × 768 60 Hz
1280 × 720 60 Hz
1280 × 800 60 Hz
1280 × 1024
*1
60 Hz
*1 Recommended resolution
To Next Page
Loading...
Need help?
General