22
Chapter 4 Administrator Settings
4-2. Functions of the “Administrator Settings” Menu
Function Description
Auto Input Detection This product automatically recognizes the connector through which PC signals are
input and displays images on the screen accordingly. When a PC is turned off or
enters power saving mode, any other available signal is displayed automatically.
When this function is set to “Off”, the monitor displays the signal from the selected
connector regardless of whether a signal is input or not. In this case, select the
input signal to display using the
operation switch on the front of the monitor.
Setting Range: On, Off
Note
• When this function is set to “On”, the monitor only enters power saving mode
after all connected PCs have entered power saving mode or have been
switched off.
DP HPD Control When a PC is connected via the DisplayPort connector, window and icon positions
may shift when power is turned off/on. If this happens, set this function to “On”.
Setting Range: On, Off
On-Screen Logo When the monitor is turned on, the EIZO logo appears on the screen.
When this function is set to “Off”, the EIZO logo does not appear.
Setting Range: On, Off
Key Lock In order to prevent changes to settings, the operation switches on the front of the
monitor can be locked.
Setting Range: Off, Menu, All
• “Off”
Enable all switches.
• “Menu”
Lock the
switch.
• “All”
Lock all switches except the power switch.
Compatibility Mode Depending on the PC and graphics board, the input signal may not be detected
and the monitor may not recover from power saving mode. If this happens, set this
function to “On”.
Setting Range: On, Off
To Next Page
Loading...
Need help?
General