EasyManuals Logo
Home>Eizo>Monitor>FLEXSCAN SX3031W

Eizo FLEXSCAN SX3031W User Manual

Eizo FLEXSCAN SX3031W
33 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #20 background imageLoading...
Page #20 background image
18
Chapter 2 Settings and Adjustments
2-9 Viewing Information/Setting Language
To check settings, usage time, etc.
[Information]
This function allows you to check settings, model name, serial number, display
mode (see page 10), and usage time of the monitor.
(1) Choose <Information> from the Adjustment menu, and press
.
The <Information> menu appears.
(2) Then, press to check settings, etc.
To set a language to be displayed [Language]
Select the Adjustment menu language.
Selectable languages
English/German/French/Spanish/Italian/Swedish/Simpli ed Chinese/
Traditional Chinese/Japanese
(1) Choose <Language> menu from the Adjustment menu, and press
.
The <Language> menu appears.
(2) Choose a language with / / / , and press .
The language setting is completed.
2-10 Beeper Setting
To set the beeper [Beep]
Set the beeper on/off for operation tone of the switches, connection error, etc.
Sound type Conditions for beeping
Short beep
• When
-/$%
is pressed.
When an item is selected with
.
When a maximum or minimum value is set with
the control switches.
• When
is pressed.
Long beep
When registration is performed with
.
Consecutive beeps When the monitor is not connected correctly.
When the PC is not turned on.
When no signal is received.
When a frequency out of the speci ed range is
received.
Beep-beep once every 15
seconds
15 minutes before the power off time set by “Off
Timer” (advance notice time)
(1) Choose <Others> from the Adjustment menu, and press .
(2) Choose <Beep> from the <Others> menu, and press .
The <beep> menu appears.
(3) Select On or Off with or , and press .
The beep setting is completed.
NOTE
The usage time is not always “0”
when you purchase the monitor due
to factory inspection.
Attention
The information is displayed in the
following order; settings, SIGNAL1,
SIGNAL2 display mode (see page 10)
and model name, serial No, and usage
time of the monitor.
SX3031W_UM_EN.indd 18SX3031W_UM_EN.indd 18 5/29/2007 1:46:08 PM5/29/2007 1:46:08 PM

Table of Contents

Other manuals for Eizo FLEXSCAN SX3031W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Eizo FLEXSCAN SX3031W and is the answer not in the manual?

Eizo FLEXSCAN SX3031W Specifications

General IconGeneral
BrandEizo
ModelFLEXSCAN SX3031W
CategoryMonitor
LanguageEnglish

Related product manuals