- 21 -
DGS-TDS-N 11.06 R.B. © Electrolux 599 51 50 25 EN
FUCS
FUCS
Foam Detection
Anti-foam control is excited via pressure switch contact fTR.
Spin-dry
Spin-dry
Pulse with
300 1/Min
Pulse with
300 1/Min
Anti-Foam
(at level fTR)
Spin-dry phase without foam: Spin-dry phase with little foam:
Spin-dry with little foam:
If pressure switch contact fTR closes (“full” position), the spin-dry cycle is interrupted and the drain
pump will run until the contact is reopening (“empty” position), and the spin-dry cycle will be
continued.
Spin-dry with excess foam:
If pressure switch contact switches 5 times to « full » position, spin-dry is skipped.
Draining is carried out for 1 minute with the motor at stop. If too much foam is detected during any
wash cycle, an additional rinse cycle is added.
To Next Page
Loading...
Need help?
General
