- 3 -
DGS-TDS-N 11.06 R.B. © Electrolux 599 51 50 25 EN
Control Panel
- Rotary programme selector with 16 positions and integral on-off switch
- 5 function keys
- 14 (15) function LEDs
The individual positions of the programme selector can be configured for different wash programmes.
Position 0 (OFF) of the selector is always defined as on-off switch. For each programme, the additional
functions available and other parameters are defined. The appliance configuration also defines the key
functions each available and the LEDs.
Cycles
LED main wash
LED rinse
LED rinse+
LED spin
LED end
LED lid
Start/Pause Button
Function:
- The selected program is activated by pressing the start/pause button.
- If the cycle is to be paused, press the start/pause button. This button is not effective when the suds
temperature is >40° C.
Pre-Wash Button
Function:
- This is available in the programmes cotton/colored, easy-care, delicate fabrics and energy-
programmes.
- Can't be combined with the “stains” button.
- It is heated up to max. 30 ° C.
LED status process
ON cycle is running (lid closed)
start/pause FLASHING cycle in pause position
OFF lid not closed
ON lid can be opened, it is possible to pause the cycle
lid (rot) FLASHING cycle was paused
OFF cycle running, no possibility to pause
To Next Page
Loading...
Need help?
General
