Emerson CR202EM9 User Manual

[]TV Screen Display Mode
2typesof displaymodescanbe selectedin the digitalmodewhenthe
broadcastingstation issending16:9video signal.
1 Press [MENU] to display the main menu.
@
2 Use [CH A/V] to select"DTV SETUP", then press
[VOL _l.
e.g.) digital TV mode
- TVSETUP -
PECTURE
CHANNEL SETUP
V-CHFPSETUP
LANGUAGE [ENGLISH]
CAPTEON [OFF]
DTV SETUP
or
Use [CH A/V] to select "DTV DISPLAY", then use
[VOL _/] to switch the desired TV aspect ratio.
or
- DWSETUP -
DTV DISPLAY [LETTERBOX]
DTVCC
or
LETTERBOX ZOOM
[LETTERBOX]
Display the digital-supported program in full-screen.
Black borders will spread in the upper and lower
screen.
[ZOOM]
Enlarge and display the center area of the digital-
supported program.
The right and left side of image will be cut off.
Press [MENU] to exit.
Note:
• Youmay notswitch the display mode depending on the
program.
[] Sleep Timer
Thesleeptimercanbesettoautomaticallyturnoffthe unitafteran
incrementalperiodoftime.
1 Press [SLEEP] to set the sleep timer.
SLEEP
SLEEP OFF
• Sleep timer display appears on theTV screen.
Press [SLEEP] repeatedly to change the amount of
time until shut off.
SLEEP
SLEEP 120 MIN
• You can set the unit to turn off after a set period of
time (from 30 to 120 minutes).
• Each press of [SLEEP] will increase the time by 30
minutes.
• After set up, the sleep timer display can be called up
for checking by pressing [SLEEP].
To Cancel the Sleep Timer
Press [SLEEP] repeatedly until "SLEEP OFF" is displayed
on the TV screen.
Note:
• Thesleep timer setting display will automatically disappear
in a few seconds.
• Whenyou disconnect the unit from theAC outlet or when a
power failure occurs, the sleep timer setting will be canceled.
EN

Emerson CR202EM9 Specifications

General

Brand	Emerson
Model	CR202EM9
Category	CRT TV
Language	English