Pole Mounting – Fiberglass Enclosure
Refer to Figure 2-16 during the mounting procedure.
1.
Attach plastic pole mounting brackets (Item4) to enclosure using split lock stainless steel
washers (Item 1) and torx head screws (Item 2).
2.
Apply Loctite 222 Low Strength Purple Threadlocker adhesive sparingly to threads of U-bolts
(Item 5).
3.
Use U-bolts (Item 5) to mount enclosure to pole using hex nuts (Item 3). Torque hex nuts to
30 in-lbs (3.4 N m).