Emerson Fisher Multiport Flow Selector User Manual

Instruction Manual
D104239X012
Multiport Flow Selector
January 2019
4
Installation
Minimum Tools Required
A torque wrench, socket wrench, and Allen head wrenches are required to install the Multiport Flow Selector Valve and
actuator assembly.
Table 4. Socket Size for Multiport Bonnet Studs and Nuts
VALVE SIZE, NPS ASME CLASS RATING SOCKET SIZE (in)
2 x 4
CL300
CL600
CL900
1-5/8
3 x 6
CL150
CL300
CL600
CL900
2
CL1500 2-3/8
4 x 8
CL300
CL600
CL900
2-3/16
4 x 10 CL1500 2-3/4
6 x 16
CL300
CL600
2-9/16
CL900 3-1/8
CL1500 3-7/8
CL2500 5
Other socket sizes (inch) required: 7/16, 1/2, 9/16, 3/4, 7/8, and 1-1/8.
Allen key sizes (inch) required: 5/32, and 1/4
Table 5. Wrench Sizes (Inch) for Multiport Inlet and Outlet Flanges
FLANGE SIZE, NPS
ASME CLASS RATING
CL150 CL300 CL600 CL900 CL1500 CL2500
2 - - - 1-1/16 1-1/16 1-7/16 - - - - - -
3 1-1/16 1-1/4 1-1/4 1-7/16 1-13/16 - - -
4 - - - 1-1/4 1-7/16 1-13/16 2 - - -
6 1-1/4 1-1/4 1-5/8 1-13/16 2-3/16 1-13/16
8 - - - 1-7/16 1-13/16 2-3/16 - - - - - -
10 - - - - - - - - - - - - 2-15/16 - - -
16 - - - 2 2-3/8 2-9/16 3-7/8 3-1/2
WARNING
Always wear protective gloves, clothing, and eyewear when performing any installation operations to avoid personal
injury. Check with your process or safety engineer for any additional measures that must be taken to protect against
process media.
Avoid personal injury and property damage by keeping hands, tools, and other objects away from the plug while operating
the valve.
Observe all WARNING decals and tags.

Emerson Fisher Multiport Flow Selector Specifications

General

Brand	Emerson
Model	Fisher Multiport Flow Selector
Category	Control Unit
Language	English