22
ECO
You can turn on ECO Node to conserve poweK
ECO mode: ON s ENERGY $TAR _ qualified sett ng.
1 Use lit to select [ECO],then press OK.
2 Use i/• to select the desred mode, then press OK.
On _sumpt u_
IPow., consumpt o/, may exceed ENERGY SIAR _
Off Iq_c,_ _m.ts.
No€
• You must sr,t [Home] in [Location]. ,,, p.23
Othetsu so, the sel¢ ngs you adjusted w not be saved when the
un}t goes into stsr,dby mode.
• You can also press ECOJ dilectly to switch the desiled setting.
,,, p.14
PC Settings
This funct on lets you adjust the PC screen postion, clock and
phase during PC nput.
1 Use i/• to select [PC Settings], then press OK.
Use •/• to select the setting you want to adjust, then
press OK,
Clock, Phase
Use _1/1_ to adjust [Clock] setting to stab Iize the PC screen
and [Phase] sett ng to reprove the clarity of the PC screen.
Cursor • Cursor •
Clock to decroase setting to increase sort n£
Phase vaue vaue
fun-Link (HDMI CEC)
Ths funct on allows you to operate the inked functions
between our brand devices with a fun Unk feature and ths
unit connecting through an HDNI cable.
1 Use •IT to select [fun-Link (HDMI CEC)],then press
OK.
3 Adjustthe foNowing items.
Auto Adjustment
Use •/• to select [Adjust], then press OK.
• The horizontal/vertical position, clock and phase of the
PC screen are automat caNy adjusted.
Horizontal Position,Vertical Position
Use _1/1_ to adjust.
Cursor _11 Cursor •
Horizontal to move PC scroerl oft to move PC screen rght
Position
Vertical to mow' PC scroerl
to move PC screen up
Position down
Use •/T to select the desired sett ng, then press OK.
3 Adjust the following terns.
fun-Link Control
Set the fun Link [On] or [Off].
The following additional settings win be grayed out when you
set to [Off],
Use •/• to select the desired setting, then press OK.
oI . ISe ects if you have connected 8rl external device
I
t
that s compat hie wth the fun-Lnk function.
D sabes all fun-Lnk
Auto Device Off"
You can set your devce to turn offby interlock ng from this
unit's powen
Use •/• to select the desired setting, then press OK.
Your connected fun Link devce turns off
On automatica y when the unt goes nto standby
mode.
Off Your cot, netted fun Link devce StdySon even f
the unit goes into standby mode.
To Next Page
Loading...
Need help?
General
