16
Before you begin:
You must set [Home] n [Location]. ,,B p.23
Otherwise, the settings you adjusted will not be memorized
after the unit goes nto standby mode,
1 Use A/V to select the _tem you want to adjust, then press
OK.
Before you begin:
You must set [Home] n [Location]. ,,,*- p.23
Otherwise, the sett ngs you adjusted will not be memorized
after the unit goes nto standby mode.
1 Use A/V to select the item you want to adjust, then press
OK.
2 Adjustthe following items,
Smart Picture
Use A/• to select the des red sett ng, then press OK.
([Personal], [Standard], [Sports], [Movie], and [Game])
Brightness, Contrast, Color, Tint, Sharpness,
Color Temperature
You can only adjust the following opt ons when you set to
[Personal] in [Smart Picture].
Use A/• to select the des red sett ng, then press OK.Then
use _1/1_ to adjust the sett ng.
Cursor _1 Cursor •
Brightness to decredse brightness to ncredse brightness
Contrast to decredse contrast to ncredse contrast
Color to decrease coot to nclease coot
intensity ntensty
Tint to add red to add green
Sharpness to soften to shal-pen
Color
to ddd wdrm colors to add coo colors
Temperature
Noise Reduction
Reduces the nose of the picture.
Use A/• to select the desired option, then press OK,
t°n
Off
Note 1
• [hs function s d sabled when PC ir,put is seected, (Sett ng will be
in grdy.)
2 Adjust the f01iowing terns.
Smart Sound
Use A/• to select the desired setting, then press OK,
([Personal], [Standard], [Movie], [blusic], and [News])
Equalizer
Adjust tonal quality for each frequency.
Use _1/1_ to select the specific frequency and use &/• to
adjust the level, then press OK.
Virtual Surround Sound
V rtual surround sound gives you the stereophonic w_tual
space through your existing 2_channel stereo system.
Use A/• to select the desired opt on, then press OK.
Auto Votume Leveling
Ths function keeps a constant loudness d fferential between
theIV commerc als and the programs.
Use A/• to select the desired opt on, then press OK,
To Next Page
Loading...
Need help?
General
