TABLE OF CONTENTS
ENEN
14
4. FIRST START-UP
NOTE
If changes are made in the 1.5 SET POWER screen, a restart of
the FEBOS-CRONO is required. The restart occurs automatically
after 10 min, or immediate restart is possible by pressing the cor-
responding icon on the HOME screen.
d. By pressing the icon , on screen 1.3 PLANT SETUP,
the history of changes to the Plant Setup is displayed
Power set up
previous electrical
editing
Recipe
previous one
Date and time
of the modification
4.4 Setting the HP model and the System Recipe
For the correct operation of the Heat Pump and management of
the system it is essential to set the size of the installed HP and the
recipe associated with the system built.
a. Press the icon
then
b. Press
c. Press the model selector for its setting
Model
Heat Pump
SERVICE
To Next Page
Loading...
Need help?
General
