3
ENEN
1. PRESENTATION
Scheme of the Integrated Management System
The integrated management of the thermal system and heat pump
(HP) is carried out through an innovative SMART-MT regulator sup-
plied with it. The SMART-MT is connected to the HP management
electronics (PCB-Main) by a special PCB-Terminal Block board,
where the various inputs and outputs of the parts that make up the
system can be connected.
The SMART-MT allows you to customize residential comfort, accord-
ing to the various needs of using energy sources and terminal units.
Using the SMART-MT, in addition to the normal commands on the
mode and operating status of the HP, all the parameters relating to
the plant management algorithms can be set.
To complete the functions present in the SMART-MT it is possible to
connect, to the PCB-Terminal Block, a normal room thermostat for
the consent of the circulator and activation of the heat pump or, a
remote management panel "FEBOS 4.0" ( CRONO, WiFi) (optional ac
-
cessory) which, in addition to the function of controlling the temper-
ature and room humidity of the main room of the residence, allows
the setting of user-managed parameters, to activate the main states
and operating modes of the HP and to report the main displays of
the SMART-MT.
Energy meter
Silence Thin Fan-coil
Dumy Floor dehumidifiers
Circulator
FEBOS-CRONO user terminal
Condensing boiler
3-way diverter valve
Eco Hydro Kit
To Next Page
Loading...
Need help?
General
