TABLE OF CONTENTS
ENEN
26
6. GENERAL USER SETTINGS
The top bar and the bottom bar are common
to all screens:
After 2 minutes of inactivity of the touchscreen the “standby screen” is activated, which displays the room temperature and any state of alarm.
Touching the screen activates the display, and the Home
screen is displayed.
The following icon is used to indicate where the screen
must be touched to execute the instruction
(It will not appear on the Febos-Crono display).
Meaning of Icons
Screen name
Access level - GUEST
USER
SERVICE
Padlock open
Settings
Web-connected WiFi signal (green color)
WiFi not connected (gray color)
Date
and time
Language
active
Graphs
Electrical
powers
Sanitary
hot water
Heat
pump
Set
Room
Home
Alarm
Padlock active
Heat pump connected
Not connected (red color)
Febos-Energy connected
Not connected
M
Master
11
Slave Address 11
12
Slave Address 12
19
Slave Address 19
Within the screens there are editable values. These are recognizable
because they are enclosed in a cell, pressing the cell will display the
keyboard on which to type the value, press OK to edit.
Below are the additional screens/information that are available by accessing as User . .
USER
To Next Page
Need help?
General