ENEN
5
1. PRESENTATION
FEBOS-CRONO basic
User terminal for controlling room temperature and humidity and
displaying and/or setting the MIRAI SMI 4.0 heat pump operating
parameters.
F
e
b
o
s
-
C
r
o
n
o
B
a
s
i
c
360° connectivity.
This is what makes the Febos-Crono world truly complete, the
plug in WiFi. The presence of the WiFi module allows performance
and independence, making it suitable for any type of installation.
In this way the room comfort system can be totally controlled
remotely (both user and service side) through a simple dedicated
web-app, using common devices such as smartphones, tablets
or PCs.
FEBOS-CRONO WiFi / FEBOS-CRONO
F
e
b
o
s
-
C
r
o
n
W
i
F
i
S
m
a
r
t
p
h
o
n
e
A
D
S
L
R
o
u
t
e
r
Web App
MIRAI SMI 4.0
Tablet or PC
FEBOS-CRONO WiFi user terminals differ from FEBOS-CRONO
Basic only due to the presence of a special internal plugin that
allows connectivity to the "Febos 4.0” System and allows control
from a dedicated web portal.
In the FEBOS-CRONO WiFi the internal information is transmitted
with Wireless technology to the home ADSL router that sends
them to the MT-CLOUD.
In this way the data is always updated and can be consulted at
any time on any device connected to the internet and wherever
you are using the appropriate WebAPP.
Technical characteristics
Plug hardware technical specifications present in
the Febos-Crono WiFi:
- WiFi module 802.11b/g/n 2.4 GHz WLAN MAC/BB processing
- Security: WEP 64/128, WPA, WPA2, TKIP, AES, WAPI
- Upgrade software via ethernet WiFi
User terminal to be connected to the RS-485 serial port of the PCB-Terminal Block terminal board of the HP
Supply voltage 24Vdc 3W
MIRAI SMI 4.0
FEBOS-CRONO Basic IMX
Cod. 07245101
Cod. 07245103 (Vers. TBR)
FEBOS-CRONO WiFi IMX
WiFi module on board
Cod. 07245111
Cod. 07245113 (Vers. TBR)
To Next Page
Loading...
Need help?
General
