Safety and operating instructions
© Construction Tools GmbH | 3390 5201 01 | 2023-05-15
Original Instructions
17
3.4 Applications
Field Type of application
General construction work Tearing up concrete and
asphalt road surfaces
Trenchwork for utilities,
foundation work
Demolition Masonry and non-rein-
forced concrete
Reinforced concrete
Rock mining/breaking
(not for MB750 E)
Secondary breaking,
bench leveling, trench-
work, foundation work
Tunneling*, mining* Roof clearing
Bench levelling
High temperature applica-
tions*
Removing encrustations
Breaking out ladles and
molds
Underwater applications* Demolition, Deepening
shipping channels
* only after consulting the Epiroc Customer Center /
Dealer in your area
3.5 Guarantee
The guarantee or product liability will be invalidated by
the following:
• Use other than intended
• Maintenance work not being carried out or being
carried out incorrectly
• The use of incorrect consumables
• The use of non-approved parts
• Damage due to wear
• Damage due to improper storage
• Changes not carried out by or in consultation with
the manufacturer
3.6 Removing the packaging
n
Remove all the packaging material.
n
Dispose of it in accordance with the applicable provi-
sions.
n
Check that the delivery is complete.
n
Check the delivery for visual damage.
n
If any defects are found, consult the Epiroc Customer
Center / dealer in your area.
3.7 Scope of delivery
The hydraulic breaker is delivered complete with:
• Hydraulic breaker
• Test gauge lower wear bush
• Safety and Operating instructions
• EC Declaration of Conformity
Accessories as ordered:
• Working tool
• Hoses
• Service box
Special accessories as ordered:
• e.g. adapter plate with Allen screws and pairs of lock
washers
• e.g. base plate to construct an adapter plate with
Allen screws and pairs of lock washers
• e.g. hydraulic fittings for the carrier
• e.g. calliper upper wear bush
To Next Page
Loading...
Need help?
General
