Safety and operating instructions
© Construction Tools PC AB | 9800 0908 01 | 2023-05-12
Original Instructions
11
A. Machine type
B. Maximum hydraulic oil pressure
C. Serial number
D. The warning symbol together with the book symbol
means that the user must read the safety and oper-
ating instructions before the machine is used for the
first time.
E. The CE symbol means that the machine is EC-ap-
proved. See the EC Declaration of Conformity which
is delivered with the machine for more information.
F. The EAC symbol means that the machine is EAC
approved.
3.3.2 Noise level label
The label indicates the guaranteed noise level corre-
sponding to EC-directive 2000/14/EC. See "Technical
data" for accurate noise level.
3.3.3 Labels on the accumulator
Read through the overhaul instructions carefully before
servicing or charging.
The accumulator must only be charged with Nitrogen.
NOTICE Only certified personnel are allowed to work
with the accumulator.
3.4 Guarantee
The guarantee or product liability will be invalidated by
the following:
• Use other than intended
• Maintenance work not being carried out or being
carried out incorrectly
• The use of the wrong consumables
• The use of non-approved parts
• Damage due to wear
• Special applications without the required safety facil-
ities
• Damage due to improper storage
• Changes not carried out by or in consultation with
the manufacturer
3.5 Scope of delivery
The hydraulic breaker is delivered complete with:
• Hydraulic breaker
• Test gauge for wear bush
• Manual grease gun
• Bio chisel paste
• Bolt kit for baseplate
• Safety and Operating instructions
• EC Declaration of Conformity
To Next Page
Loading...
Need help?
General
