Safety and operating instructions
22 © Construction Tools PC AB | 9800 0908 01 | 2023-05-12
Original Instructions
8 Storage
WARNING Heavy hydraulic breaker and working
tool
The hydraulic breaker and the working tool are heavy
equipment. If the breaker or working tool topple over or
fall down from where they are stored, it can result in ma-
terial damage and personal injury.
u Store the hydraulic breaker and the working tool so
that falling or rolling down is prevented.
If the hydraulic breaker is not used for a long time, the
following steps have to be considered to protect the hy-
draulic breaker from corrosion:
1.
Clean the hydraulic breaker carefully.
2.
Dismount the working tool and lubricate the front part
of the piston, bushing and the tool retainer lock.
3.
Store the hydraulic breaker in a dry place.
8.1 How to proceed after more
than twelve months‘ storage
WARNING Risk of injury
Nonprofessional disassembly and assembly of the hy-
draulic breaker may lead to serious injury and property
damage.
u Disassembling the hydraulic breaker is only permit-
ted if carried out by professionals trained by Con-
struction Tools. These professionals must follow all
safety instructions and guidelines for repair.
The following measures are required to prevent prema-
ture hydraulic breaker failure, after it has been stored for
over twelve months:
n
Contact the Epiroc Customer Center / Dealer in your
area.
n
Professionals trained by Construction Tools will dis-
assemble the hydraulic breaker properly and:
–
check any parts liable to corrosion for corrosion
damage.
–
rework or replace corroded parts.
–
replace all sealing elements.
9 Disposal
A used machine must be treated and scrapped in such a
way that the greatest possible portion of the material can
be recycled and any negative influence on the environ-
ment is kept as low as possible.
Before a used machine is scrapped it must be emptied
and cleaned from all hydraulic oil. The remaining hy-
draulic oil must be deposited and any negative influence
on the environment is to be kept as low as possible.
Environmental Product Compliance - Reach Declara-
tion
Presence and name of substances in the products that is
included in EU Reach Candidate List of Substances of
Very High Concern are set out in the relevant Spare
Parts Catalog of each product.
To Next Page
Loading...
Need help?
General
