Configuration Menu
69
Wireless LAN menu
Function Menu/Settings Explanation
Connection Mode
Quick, Advanced Determines how the wireless LAN is connected.
Quick: Using Epson iProjection allows you to connect to
smartphones, tablets, or computers directly using wireless
communication. The projector becomes a simple access
point. (Make sure the number of devices connected to the
projector is six or less. It may take longer to update the pro-
jected image if the number of connected devices exceeds this
number.)
Advanced: Lets you connect to multiple smartphones, tab-
lets, or computers over a wireless network access point.
Channel
*1
1ch, 6ch, 11ch Select the frequency bandwidth used by the wireless LAN.
SSID
*2
Up to 32 alphanumeric
characters
Enter an SSID. When an SSID is provided for the wireless LAN
system in which the projector participates, enter the SSID.
Search Access
Point
*2
To Search View Search for available wireless network access points.
indicates currently connected access points. indicates
access points where security is set.
If you select an access point that has security enabled, Secur-
ity menu appears.
s p.69
IP Settings
*2
DHCP
Set whether or not (On/Off) to use DHCP. If this is set to On,
you cannot set any more addresses.
IP Address Inputs the IP address for the projector.
The following IP addresses cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a
number from 0 to 255)
Subnet Mask Enter the projector's subnet mask.
The following subnet masks cannot be used.
0.0.0.0, 255.255.255.255
Gateway Address Enter the projector's gateway IP address.
The following gateway addresses cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a
number from 0 to 255)
SSID Display
On, Off Sets whether or not to display the SSID on the LAN Standby
screen and the Home screen (On or Off).
IP Address Display
On, Off Sets whether or not to display the IP address on the LAN
Standby screen and the Home screen (On or Off).
*1
This can only be set when Connection Mode is set to Quick.
*2
This can only be set when Connection Mode is set to Advanced.
Security menu
Function Menu/Settings Explanation
Security
No, WPA2-PSK, WPA/
WPA2-PSK
Sets the security.
In Quick, WPA2-PSK is selectable. In Advanced, WPA2-
PSK/WPA/WPA2-PSK is selectable.
Passphrase
From 8 to 32 single-
byte alphanumeric
characters
Inputs the passphrase.
It is recommended to change the passphrase periodically for
the purpose of security.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
