Wireless Network Projection
85
Selecting Wireless Network Settings in Mac
Before connecting to the projector, select the correct wireless network in Mac.
a
Click the Wi-Fi icon on the menu bar at the top of the screen.
b
When connecting in Advanced connection mode, make sure Wi-Fi is
turned on and select the network name (SSID) of the network the
projector is connecting to.
Setting Up Wireless Network Security
You can set up security for your projector to use on a wireless network. Set up
one of the following security options to match the settings used on your
network:
• WPA2-PSK security
• WPA3-PSK security *
• WPA2/WPA3-PSK security *
• WPA3-EAP security * **
• WPA2/WPA3-EAP security * **
* Available only for the Advanced connection mode.
** Available only for models that support WPA Enterprise security.
a
Contact your network administrator for guidance on entering the
correct information.
a
If you want to set up the WPA3-EAP or WPA2/WPA3-EAP security,
make sure your digital certificate file is compatible with projector
registration and placed directly on the USB storage device.
b
Press the [Menu] button, select the Network menu, and press [Enter].
c
Select Network Configuration and press [Enter].
d
Select the Wireless LAN menu and press [Enter].
e
Select the Security setting and press [Enter].
f
Select the security settings to match your network settings.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
