Epson EX21 User Manual

28 Setting Up the Projector
3. Press the Ppower button on the remote control or on the
projector.
The projector beeps once and the Ppower light flashes green as
the projector warms up, then an image begins to appear. When
the Ppower light stops flashing and remains green, the projector
is ready for use.
4. If you are prompted to enter a password, see page 53.
Using the Direct Power On Function
The Direct Power On function enables faster setup. The projector
starts up automatically when you plug it in or turn it on with a wall
switch. You don’t have to press the Ppower button.
Follow these steps to enable Direct Power On:
1. Press the
Menu button on the remote control or projector, then
select the
Extended menu and press Enter.
2. Choose
Operation and press Enter.
3. Choose
Direct Power On and press Enter.
4. Highlight
On and press Enter.
Power
button
warning
Never look into the lens
when the lamp is on. This
can damage your eyes, and is
especially dangerous for
children.
note
If a power outage occurs
when Direct Power On is
enabled and the projector is
plugged in, the projector will
restart when the power is
restored.

Epson EX21 Specifications

Projection

projection system	Epson 3LCD, 3-chip technology
white light output	2200 lumens
color light output	2200 lumens
aspect ratio	4:3
native resolution	800 x 600 (SVGA)
resize resolution	640 x 480 (VGA)
contrast ratio	2000:1

Power

power supply voltage	100 – 240 V ±10%, 50/60 Hz
power consumption	246 W, 3 W standby
lamp type	170 W UHE

Operating Environment

operating temperature	41 ˚ to 95 ˚F (5 ˚ to 35 ˚C)
lamp life in ECO mode	Up to 4000 hours
lamp life in normal mode	Up to 3000 hours
fan noise in normal mode	35 dB
fan noise in ECO mode	28 dB

Lens

lens type	Digital zoom/Manual focus
f-number	1.44
focal length	16.6 mm
zoom ratio	Digital zoom 1.0 – 1.35

Weight and Dimensions

dimensions including feet	12.9" x 9.6" x 4.0"
dimensions excluding feet	12.9" x 9.6" x 3.6"
weight	6.0 lb