Epson EX21 User Manual

Solving Problems 69
Checking Projector Status
If your projector isn’t working correctly, first turn it off and unplug it.
Then plug the power cord back in and turn on the projector. If this
doesn’t solve the problem, check the lights on top of the projector.
What To Do When the Lights Flash
The lights on top of the projector indicate the projector’s status.
Refer to the following tables for a complete description of the
projector’s status lights:
Temperature
light
Lamp light
Power light
Power light status
P
Power light status Description
Flashing green The projector is warming up. Wait for the image to appear.
Green The projector is operating normally.
Orange The projector is in sleep or standby mode. You can unplug it or press the
P power button to turn it on.
Red, flashing red, or
orange
There is a problem with the projector. Check the next table to diagnose the
problem.

Epson EX21 Specifications

Projection

projection system	Epson 3LCD, 3-chip technology
white light output	2200 lumens
color light output	2200 lumens
aspect ratio	4:3
native resolution	800 x 600 (SVGA)
resize resolution	640 x 480 (VGA)
contrast ratio	2000:1

Power

power supply voltage	100 – 240 V ±10%, 50/60 Hz
power consumption	246 W, 3 W standby
lamp type	170 W UHE

Operating Environment

operating temperature	41 ˚ to 95 ˚F (5 ˚ to 35 ˚C)
lamp life in ECO mode	Up to 4000 hours
lamp life in normal mode	Up to 3000 hours
fan noise in normal mode	35 dB
fan noise in ECO mode	28 dB

Lens

lens type	Digital zoom/Manual focus
f-number	1.44
focal length	16.6 mm
zoom ratio	Digital zoom 1.0 – 1.35

Weight and Dimensions

dimensions including feet	12.9" x 9.6" x 4.0"
dimensions excluding feet	12.9" x 9.6" x 3.6"
weight	6.0 lb