Paper Does Not Feed Correctly
Check the following points, and then take the appropriate actions to solve the problem.
❏ Place the printer on a at surface and operate in the recommended environmental conditions.
❏ Use paper supported by this printer.
❏ Follow the paper handling precautions.
Related Information
& “Environmental Specications” on page 92
& “Paper Handling Precautions” on page 15
& “Available Paper and Capacities” on page 16
& “List of Paper Types” on page 16
Paper Jams
❏ Load paper in the correct direction, and slide the edge guides against the edges of the paper.
❏ Load one sheet of paper at a time if you have loaded several sheets of paper.
Related Information
& “Removing Jammed Paper” on page 72
& “Loading Paper in the Rear Paper Feed” on page 17
Paper Feeds at a Slant
Load paper in the correct direction, and slide the edge guides against the edges of the paper.
Related Information
& “Loading Paper in the Rear Paper Feed” on page 17
Several Sheets of Paper are Fed at a Time
❏ Load one sheet of paper at a time.
❏ When several sheets of paper are fed at a time during manual 2-sided printing, remove any paper which is
loaded in the printer before you reload the paper.
No Paper Feeds
❏ Do not load more than the maximum number of sheets
specied
for the paper. For plain paper, do not load
above the line indicated by the triangle symbol on the edge guide.
❏ If you have the cleaning sheet that came with Epson genuine paper, use it to clean the roller inside the printer.
User's Guide
Solving Problems
75
To Next Page
Loading...
Need help?
General
