44 Fine-Tuning the Projector
Using the Menu System
You can use the remote control or the projector’s control panel to
access the menus and change settings. Follow these steps:
1. To display the menu screen, press the
Menu button on the
remote control or on the projector.
You see a menu screen similar to the one below:
The menus are listed on the left and the options available for the
highlighted menu are shown on the right.
2. Use the pointer button on the remote control (or the
navigational buttons on the projector) to scroll through the menu
list. When you’ve highlighted the desired menu, press the
Enter
button to select it.
3. Once you’ve selected the menu, use the pointer button to
scroll through the list of options. (Some of the options may be
grayed out or unavailable, depending on the selected source.)
note
The Network option does
not appear in the
1700c/1710c menu.
Menu list
Options
To Next Page
Loading...
Need help?
General