Epson SC-T3100M Series User Manual

Choosing a Print Size
A
Check the document size (or paper size) setting
on the Printer Settings tab of the printer driver.
Windows
Display the Printer Settings tab of the printer
driver from the application and check that the
document size is the same as the setting of the
application.
If it differs, click Settings... and specify the
correct size in the Change Paper Size dialog box.
U “Basic Operating Procedures (Windows)”
on page 48
Mac
Open the page setup screen of the application
and check that this printer is selected in Printer
and check the paper size.
Select a paper size that does not have (Retain
Scale) or (Roll Paper Banner).
If the size is different, select the correct size
from the pull-down menu.
U “Basic Operating Procedures (Mac)” on
page 54
Note:
In the case of an application without a page setup
menu item, you can set the paper size if you open
the Print dialog box from the Print menu item.
B
Display the Output Size input screen from the
Printer Settings tab of the printer driver.
Windows
Select Others... and then select Specify Size in
the displayed Output Size dialog box.
Mac
Select Specify Size.
SC-T3100M Series/SC-T5100 Series/SC-T3100 Series/SC-T5100N Series/SC-T3100N Series/SC-T2100 Series User's Guide
Printing with the Printer Driver from Your Computer
65

Epson SC-T3100M Series Specifications

General

Brand	Epson
Model	SC-T3100M Series
Category	Printer
Language	English