Copy (SC-T5400M
Series Only)
Placing Documents in the
Scanner
You can load one document.
The document sizes and paper types that can be loaded
and the documents that cannot be loaded are as follows.
c
Important:
If a document covered in dust is loaded, the dust
may adhere inside the scanner and decrease the
quality of copied or scanned images. Before loading
a document into the scanner, remove any dust from
the document.
Loadable Document Sizes
Width of document: 148 mm to 914 mm (36 inches)
Length of document: 148 mm to 30480 mm (120
inches)
*
Thickness of original: 0.8 mm or less (or 0.55 mm or less
with the optional carrier sheet)
* Depending on the settings and the data format, the
maximum length may be different as shown below.
Copying
Color and monochrome
Quality With skew
correction
Without skew
correction
Super Fine 2747 mm
Fine
Speed 5494 mm
Draft
Scanning
TIFF: Monochrome binary (black and white)
Output
resolution
With skew
correction
Without skew
correction
600 dpi 2749 mm 30480 mm
400 dpi 4129 mm
300 dpi 5509 mm
200 dpi 8269 mm
JPEG: Color and monochrome (grayscale)
Output
resolution
With skew
correction
Without skew
correction
600 dpi 2747 mm
400 dpi 4120 mm
300 dpi 5494 mm
200 dpi 8241 mm
PDF and PDF/A: Color and monochrome (grayscale)
Output
resolution
With skew
correction
Without skew
correction
600 dpi 2747 mm
400 dpi 4120 mm
300 dpi 5054 mm
200 dpi
Loadable Paper Types
❏ Plain paper
❏ Recycled paper
❏ Coated paper
❏ Glossy paper
❏ Tracing paper
❏ Film
❏ Blueprint
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide
Copy (SC-T5400M Series Only)
103
To Next Page
Loading...
Need help?
General