Epson SC-T5400 SERIES User Manual

Loading and Setting
the Paper
Notes on Loading the
Paper
Caution:
Do not rub the edges of the paper with your hands.
The edges of the paper are thin and sharp and could
cause an injury.
Do not load roll paper with the right and left edges
uneven
Loading roll paper with the right and left edges uneven
may cause paper feeding problems or paper meandering
may occur during printing. Rewind the paper to make
the edges even before using roll paper or use roll paper
with no problem.
Do not load curled paper
Loading curled paper may cause paper jams or soiled
prints. Flatten the paper before use by bending it in the
opposite way or use paper with no problem.
Unsupported paper
Do not use paper that is wavy, torn, cut, folded, too
thick, too thin, has a sticker affixed, etc. Doing so may
cause paper jams or soiled prints. See the following for
paper supported by the printer.
U “Epson Special Media Table” on page 220
U “Supported Commercially Available Paper” on
page 224
Paper Load Position
Roll paper and cut sheets can be loaded. See the
following for more details on the paper that can be used
with the printer.
U “Supported Media” on page 220
Roll Paper
Roll paper from 254 mm to the maximum printable
width can be loaded.
Cut Sheet(1 sheet)
One sheet of cut paper from A4 to the maximum
printable width can be loaded.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide
Loading and Setting the Paper
34

Epson SC-T5400 SERIES Specifications

General

Brand	Epson
Model	SC-T5400 SERIES
Category	Printer
Language	English